Training Courses

RIIWHS202E - Enter and Work in Confined Spaces

This course is designed for participants, who are required to work in a confined space, for maintenance purposes, for cleaning, inspection or other reasons. This course is mandatory for all workers, who are required to enter a confined space, as defined by the Australian Standards AS2865.

RIIWHS204E - Work Safely at Heights

The Work Safely at Heights training course covers how to work in accordance with height safety regulations, Australian Standards and relevant codes of practice. Participants will have an understanding of risk assessment procedures and permits to work at height. Participants who undertake our height safety training course will also undergo practical instruction in the correct use of height safety equipment and develop skills to select height safety equipment and apply it to specific tasks.

MSMWHS216 - Operate Breathing Apparatus

The breathing apparatus training course will equip the participant with the skills required to safely inspect, maintain and operate self-contained breathing apparatus (SCBA). This training will be suitable for both confined space workers, or workers who may be required to use breathing apparatus during fire or in hazardous environments.

MSMWHS217 - Gas Test Atmospheres

The Gas Test Atmospheres training course is designed for personnel who may need to undertake monitoring of potentially hazardous atmospheres in the workplace. Areas that may need to be atmospherically tested may include: confined spaces, work around hazardous material storage areas, restricted spaces or areas which contain dangerous goods.

HLTAID009 - Provide Cardiopulmonary Resuscitation (CPR)

This nationally recognised course covers the skills and knowledge required to perform cardiopulmonary resuscitation (CPR) in accordance with the Australian Resuscitation Council (ARC) Guidelines. This unit applies to all workers who may be required to provide cardiopulmonary resuscitation in a range of situations, including community and workplace settings. There are legislated requirements in each state in relation to this training. These requirements will be documented in each state's approved code of practice for first aid.

HLTAID011 - Provide First Aid

The Provide First Aid Training Course is designed to equip participants in how to respond to first aid emergencies that may occur at home, office or anywhere. Many practical exercises are included as part of the training.

HLTAID012 - Provide First Aid In An Education And Care Setting

This course provides practical training for workers within an education and care setting to respond to first aid emergencies in line with legal and workplace requirements, Australian Resuscitation Council guidelines and other Australian national peak clinical bodies. It teaches how to identify illness or injury, access emergency services, safely provide first aid treatment using action plans, equipment and resources, for CPR, defibrillation, administering an autoinjector for anaphylaxis, administering asthma medication, immobilisation for envenomation, fractures, dislocations, sprains and strains, for bleeding and shock and other conditions. You will learn basic anatomy, physiology and the differences between adults, children and infants relating to CPR, managing an infant or child with an acute illness, or who requires an immediate ambulance response and conveying incident details to parents, caregivers and emergency services. The course covers completing incident documentation and debriefing for improvement of response, recognising psychological impacts, talking with children about their emotions and seeking help as required.

HLTAID014 – Provide Advanced First Aid

HLTAID014 Provide Advanced First Aid deals with Challenging situations, such as multiple casualty incidents, having to move or extricate casualties, or treating potentially fatal illnesses and injuries are high risk. It is imperative that training occurs to be able to know what to do when confronted with a real-life incident. This course provides practical simulated real-life situations to learn and gain the confidence to coordinate and manage a response and provide advanced first aid in line with legal, community and workplace considerations, Australian Resuscitation Council guidelines and other Australian national peak clinical bodies until emergency services arrive.

HLTAID015 - Provide Advanced Resuscitation

Our Advanced Resuscitation Training course is designed to train personnel in how to respond to first aid emergencies with practical ‘hands on’ training for advanced patient care using oxygen equipment and an Automatic External Defibrillator (AED).

Course Set - HLTAID011 & HLTAID015

First Aid And Advanced Resuscitation And Oxygen Therapy Course Set. With instruction and practical training in line with legal, workplace and community considerations, Australian Resuscitation Council guidelines and other Australian national peak clinical bodies, this first aid course teaches the skills and knowledge to recognise emergencies and provide immediate and effective CPR, first aid treatment and oxygen therapy in a range of complex situations, including community and workplace settings.

Course Set - HLTAID015 & HLTAID007 (including HLTAID009 & HLTAID010)

This course is delivered in line with the Australian Resuscitation Council guidelines and applies to all workers or members of the community who may be required to provide oxygen, advanced resuscitation or advanced first aid in the event of an emergency, until the arrival of medical or other assistance.

MSMWHS201 - Conduct Hazard Analysis

This short course covers the skills and knowledge required to conduct a hazard analysis. These are typically called: Job safety analysis (JSA) Job hazard analysis (JHA) Job safety and environmental analysis (JSEA) Safe work method statement (SWMS)

MSMPER200 - Work in Accordance With an Issued Permit

This course applies to those who are required to conduct work activities under the authority of an issued permit to work and within the context and requirements of that permit. This typically applies to all work done by maintenance staff and contractors and also to any other non-process work performed on the plant.

MSMPER300 - Issue Work Permits

This competency teaches the skills and knowledge required to Issue Work Permits. A Permit to Work is a procedure, with a written permit form, which is used to authorize and control work activities with high risk hazards.

PUAFER005 - Operate as Part of an Emergency Control Organisation

This course provides professional training for all levels of the ECO, giving the participants the competencies and confidence to undertake the duties set out in the Emergency Management Plan (EMM) for the building.

MSMWHS212- Undertake First Response to Fire Incidents

This unit is designed to ensure that an appropriate first response to fire incidents in onshore and offshore situations/emergencies is achieved. This competency applies to students who are required to respond to fires in the workplace (other than evacuating to the assembly point).

PUAFER008 Confine Small Emergencies in a Facility

This course covers the skills and knowledge for preparing for emergency situations, identifying and assessing an emergency, safely confining emergencies, using initial response equipment and reporting on the facility's emergency response.

PUASAR022 - Participate in a Rescue Operation

This unit of competency involves the skills and knowledge required to participate in rescue operations as a member of a rescue team; it underpins specialist rescue operations. The course includes a wide range of rescue and environmental situations, which may incorporate industrial, rural, bush and extreme environmental conditions.

PUASAR025 - Undertake Confined Space Rescue

This nationally recognised course is designed for individuals who are required to implement rope based rescues to rescue personnel from confined spaces. These individuals may work alone or as a part of a multi-disciplinary team. Our training can be customised to suit scenarios related to your work place, with various types of equipment used dependent on the rescue's complexity.

UETDRRF004- Perform Rescue From a Live LV Panel

This course is suitable for workers who are required to maintain skill levels in low voltage rescue procedures as part of their duties working on or near electrical equipment, such as electricians and crane technicians. This course can be contextualised to suit the specific requirements of the participants'.

UETDRMP010 - Provide First aid in an ESI environment

By undertaking this course, individuals will be provided with the knowledge and skills required to provide first aid in an electricity supply industry (ESI) environment. Individuals will be able apply their skills and knowledge by being able to recognise the need for first aid in an emergency situation and providing an initial first aid response, including basic life support measures, according to established workplace first aid policies and procedures. Application of the skills and knowledge described in this unit may require a licence/registration to practice in the workplace or ESI environment and may be subject to regulations for undertaking of electrical work. State and territory legislative and regulatory licencing requirements must be confirmed prior to commencing this unit.

Course Set - HLTAID009 & UETDRRF004 (CPR/ LVR)

The CPR and LVR course is essential if you are conducting live work or working with live switchboards. The course covers the performance of rescue procedures from a live Low Voltage (LV) apparatus, not including overhead lines and underground cables in the workplace. It specifies the mandatory requirements of rescue from a live LV panel and how they apply in the context of transmission, distribution or rail work functions. It encompasses responsibilities for, health, safety and risk management processes at all operative levels and adherence to safety practices as part of the normal way of doing work.

Course Set - HLTAID009 & UETDRMP010 (CPR / ESI FIRST AID)

By undertaking this course, individuals will be provided with the knowledge and skills required to recognise when someone is unconscious and not breathing normally (Cardiac Arrest) and increase their chance of survival by calling an ambulance and performing potentially lifesaving cardiopulmonary resuscitation (CPR), including using a defibrillator, until emergency services arrive to take over. This course also provides individuals with knowledge and skills to provide first aid in an electricity supply industry (ESI) environment. Individuals will be able to apply their skills and knowledge by being able to recognise and provide an initial response where first aid is required in emergency situations, which includes the ability to provide essential first aid using basic life support measures according to established workplace first aid policies and procedures.

Course Set - HLTAID011 & UETDRRF004 (First Aid/LVR)

The First Aid and LVR course is essential if you are conducting live work or working with live switchboards. The course covers the performance of rescue procedures from a live Low Voltage (LV) apparatus, not including overhead lines and underground cables in the workplace.

PUAEME007 - Provide Emergency Care For Suspected Spinal Injury

The course applies to individuals who may be required to provide emergency care to a casualty with suspected spinal injury. This course is designed to provide the knowledge and skills required to minimise further injury to a casualty, both conscious and unconscious, when applying first aid and waiting for emergency medical aid in a range of situations, including community and workplace settings.

UETTDRRF02 Perform Pole Top Rescue

This unit covers the performance of pole top rescue procedures as an emergency procedure required in the workplace. It specifies the mandatory requirements of rescue from a pole top and how they apply in the context of transmission, distribution and rail work functions. It encompasses responsibilities for rescue, health, safety and risk management processes at all operative levels and adherence to safety practices as part of the normal way of doing work.

UETDREL006 – Working Safely Near Live Electrical Apparatus as a Non-Electrical Worker (Electrical Spotter)

This course is designed for individuals who are required to operate or observe the operation of cranes, plant and hand held tools in the vicinity of live overhead power lines and associated electrical apparatus in accordance with the WorkCover Code of Practice “Work Near Overhead Power Lines”.